Remote control car roof‘s LED light and car’s packing light at the same time

A customer wants to remote control LED light on his car roof. He needs one transmitter and two very small receivers, He said that when the parking lights is on, the LED lights on the car roof should also turn on at the same time. The LED light should turn off, when the parking lights is off.



In this case, we recommend the customer to choose the transmitter CB-2V and the receiver S1XL-DC12.

Transmitter: Model: 0021044 (CB-2V)

receiver S1XL-DC12

The customer just needs to connect the power from parking lights to the transmitter CB-2V, and connect the receiver S1XL-DC12 to the LED light. It’s done.
More information please visit our online shop: http://www.carymart.com/.

Remote control fluorescent light fixture

Here is the customer’s question.
I’m trying to accomplish the following: Want to turn on a fluorescent light fixture whenever the garage door opener light (120v) is on. Want to place a wireless transmitter at the door opener with auxiliary wires that would tie into the light circuit (120v) on the opener. When power is applied to the transmitter it would send wireless signal to receiver and it would then close contacts and turn on fluorescent fixture. The contacts on the receiver would open when power (120v) is removed from the transmitter. I saw a similar posting on your website, but the transmitter (CB-2V) auxiliary wires do not appear to work with 120v. Could you please provide a solution?



The operation of this case is very simple. Just needs to connect the power from garage door opener to the transmitter CB-2V, and connect the receiver to the fluorescent light fixture.

Transmitter: Model: 0021044 (CB-2V)


Online shop: www.carymart.com

Remote control pump start relay with special transmitter

One of our customers is trying to operate a pump start relay using an RF signal, but using an irrigation timer as the control for the transmitter instead of a fob or push button RC control. The irrigation timer has an output for wire controlled pump start relays. It is a simple 2 wire control, and is 24v output. There is also 110v output if needed, (to power the transmitter for instance.) He needs a transmitter that can be operated by the irrigation control using the 24v output to activate the transmitter. The irrigation control is approximately 200 yards from the pump start relay, and there is no clear line of sight.

Recommended product:
Receiver: Model: 0020488 (S1PUA-AC220-ANT2)

Transmitter: Model: 0021044 (CB-2V)

The reason why we recommend this RF remote control kit:

1. According to the description from the customer, we know that the working range of his irrigation control is approximately 200 yards from the pump start relay. Theoretically speaking, the working range of this remote control kit which we have recommended to him can reach 2000M / 6000ft.
2. The receiver 0020488 (S1PUA-AC220-ANT2) can control equipment with AC110~240V or DC0~28V, such as, pump, lights, motors, fans, electrically operated doors/ locks/ windows/ blinds/ cars and so on. The maximum working current of the receiver is 30A.
3. The transmitter 0021044 (CB-2V) has extended input wires. When it has DC 5~28V power input for red wire and black wire of the transmitter, the transmitter will be triggered and then it will send an RF signal of "ON" to turn on the receiver, the device controlled by the receiver will starts to work. When it does not have DC 5~28V power input for red wire and black wire of the transmitter, the transmitter will be triggered and then it will send an RF signal of "OFF" to turn off the receiver, the device controlled by the receiver will stops working.
4. Therefore, when wiring the customer’s irrigation timer to the transmitter, it can easily remote control his pump start relay.

In this case, the customer just needs to connect the power from irrigation control to the transmitter CB-2V, and connect the receiver S1PUA-AC220-ANT2 to the pump start relay.

Operation:
We can show you how to use transmitter (CB-2V) to remote control small water pump.
As I have mentioned above, the most significance feature of transmitter (CB-2V) is that it has extended input wires, which means you can wire power supply to the transmitter and then switch on the power to remote control the water pump instead of pressing button of the transmitter to remote control the water pump.
First, let’s see what we need to prepare in order to achieve this action.

Material Preparation:
Receiver: 0020275(S1PU-AC220)
Transmitter: 0021044(CB-2V)
Some lines
Small water pump
Two water pipes
One AC Power Supply and two DC Power Supplies

Operation:
First, wire the DC power supply to the small water pump and terminal B of the receiver.
Then, wire the small water pump to terminal A of the receiver.
Next, wire the AC power supply to the receiver.
At Last, wire another DC power supply to the transmitter.
Now, all you need to do is switch on the power, and then you can remote control the water pump.
If you want to remote control the water pump by pressing the button on the transmitter, you will no longer need to wire the power supply to the transmitter. The following are the materials you should prepare.

These two operations can all remote control the small water pump, the water will move from the green bowl to the white bowl.
More information please visit our online shop: http://www.carymart.com/.

Remote control LED lights on riding arena

I built my wife an outdoor riding arena for horse riding. I'm looking at installing 6-8 led flood lights with solar panels to charge 12 volt batteries. Wondering if there was a way I could get a single remote to turn the all lights on and off at the same time. Thanks!

You can buy several receivers and a remote, and install each light to a receiver, then use this remote to turn the all lights on and off at the same time.
We have one-to-many remote control kits. This kind of system includes one-transmitter-to-many-receiver system and one-receiver-to-many-transmitter system. It is often used for controlling two or more electrical devices in different places by one remote; or one electrical device by two or more remotes.
Here are some pictures.

The RF wireless remote control kit is 99 Channel Wireless Transmitter with 24 RF DC Power Receivers remote control system. The working distance can reach 1000M in an open area.

The second RF remote control kit is one transmitter controls 12 receivers system. The maximum working current is 10A.

The third RF wireless remote control systems can remote control six receivers.
With such RF remote control system, you can remote control several device at the same time.
RF remote control shop: www.carymart.com

DIY: remote control 2 AC motor in positive and reverse rotation

Change Keyed Rotary Switch to Remote Control Switch

How to remote control compressor, blower and pump?

I am looking to convert a keyed rotary switch with a remote control switch. The switch has 4 positions, position 1 is all Off. Position 2 lower (turns on compressor) Position 3 Raise (turns on a blower) and Position 4 Drain (turns on a pump). These are turned on individually not all at the same time. The voltage required to power the remote control is AC220V. No current is required to power the devices. The relays are basically open or closed. I would like a 4 channel RF product so I have one channel spare. Can you assist me with what product suits this please.

According to the descriptions from this customer, we recommend him 4 CH Relay output long range waterproof case wireless remote control kit 0020450 (S4PU-AC220-ANT3+1CB-4). Set the receiver S4PU-AC220-ANT3 with Latched mode, then connect compressor to relay 2 in the receiver, connect blower to relay 3 in the receiver, connect pump to relay 4 in the receiver. This remote control kit is composed of a 4-channel receiver and 4-button transmitter that can be used in agriculture automation, industry automation, and home automation. It can control products on land, water and air, especially in a long distance, such as business signs, motorboat, farm, pasture, offshore unmanned operation, field call, remote security alarm, unmanned aerial vehicle, etc. Connected the compressor to the relay 1 of the 4 CH receiver, connect the blower to relay 2 of the 4 CH receiver, connect the pump to the relay 3 of the 4 CH receiver.

There are some remarkable characteristics of this 4 CH Relay output long range waterproof case wireless remote control kit.
Waterproof Function: The 4 channel receiver has waterproof connector and waterproof shell/case, so it can be installed outside.
Working Distance: With external telescopic antenna, this remote control kit can have further working distance. The working distance of the kit can reach 2000m in an open ground. If you stretches the external telescopic antenna, it can have a further working range.
Relay Output: The 4 CH receiver is relay output that can be used to operate both DC and AC equipments. The terminal is NO / NC (normally open / normally closed), which serves as a switch. That means you should also connect a separate power supply to it.
Power Output: Each relay output can work at maximum current 30A. The maximum power of the device is 3000W/110V, 6000W/220V. So it also can be used in agriculture and industry automation, such as long range and high power remote control devices.
Input control terminals: The receiver has four input control terminals, you can connect external devices, sensors, or manual switches to these terminals to control the outputs of receiver.
Three Control Modes: The 4 channel receiver has toggle / momentary / latched working control modes. We use latched control for 4 positions keyed rotary switch.
How to set working control mode?
Set toggle control mode (Press -> On; Press again -> Off): Only connect Jumper-2
Set momentary control mode (Press and hold -> On; Release -> Off): Only connect Jumper-1
Set latched control mode (Press -> On, other relays Off; Press other button -> Off): Disconnect Jumper-1 and Jumper-2

We use 3 lamps to instead the compressor, blower and pump. Now let’s change the keyed rotary switch to remote control switch.
Material Preparation:
Receiver: S4PU-AC220-ANT3
Transmitter: CB-4
3 Lamps
A keyed Rotary Switch
Some Lines

The Wring Diagram:
Just as the following pictures. Connect 3 lamps and 4 positions keyed rotary switch to the 4 Ch receiver. The black wire of the 3 lamps is connected and connect the other black wire to terminal “-“. Connect the red wire of 3 lamps respectively to terminal “A” of relay 1, relay 2 and relay 3. Connect red wire and black wire of the plug respectively to “+” and “-“ of the power. Please note that the red wire used to control lamp1 (compressor) should be connected to terminal A of the relay 1, the red wire used to control lamp2 (blower) should be connected to terminal B of the relay 2, the red wire used to control lamp2 (pump) should be connected to terminal B of the relay 3. The red wire used to turn off the equipments should be connected to terminal B of the relay 3.

Operation:
Press button A of the transmitter, the lamp 1 turns on.

Press button B of the transmitter, the lamp 1 turns off and the lamp 2 turns on.

Press button C of the transmitter, the lamp 2 turns off and the lamp 3 turns on.

Press button D of the transmitter, turn off all of the lamps.

Online shop: http:www.carymart.com