显示标签为“high power”的博文。显示所有博文
显示标签为“high power”的博文。显示所有博文

2015年10月18日星期日

Wireless High Power Remote Switches On or Off a 30A Relay

One customer came to us to find a 12V high power remote which is able to turn on or off a relay 12V30A. He said that he has tried other brand products but they didn’t work well because they were not high power and didn’t activate his relay. He is wondering whether there are any favorable products at our end.
We recommend this model of wireless high power remote switch (S1PU-DC12+2C-2) to him.
remote controlRelay
One channel is for one device. It is favorable for the device which working current is 30A. Control Lights, Motors, Fans, electrically operated Doors/ Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. There are three working mode for your choice. They are Toggle, momentary and latched modes.
Setting control mode Toggle: Only connect Jumper-1.
Press button 1: Turn on the relay
Press button 1 again: Turn off the relay

Setting control mode Momentary: Only connect Jumper-2.
Press and hold button 1: Turn on the relay
Release button 1: Turn off the relay

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.
Press button 1: Turn on the relay
Press button 2: Turn off the relay
As for wiring, please see the wiring diagram. A,B terminals are normally open; A,C terminals are normally close. So being controlled device should be connected to A,B terminals. This device can be activated by dc 0~28V or ac 110~240V. Besides this, the receiver should be supplied dc 12V power supply.
circuit
Online shop: www.carymart.com

2015年10月12日星期一

High Power Smartphone Wi-Fi Controller Controls LED Lamp (iOS system)

iOS system is a mobile operating system developed and distributed by Apple Inc. It is extended to support other Apple devices such as iPod Touch, iPad other than iPhone. As we known, Wi-Fi is an advantage local area network, which is received by any Smartphone including Apple device. Now we integrate Wi-Fi networking and device with iOS system to develop a brand new product, Smartphone Wi-Fi Controller.
002
It works under Wi-Fi connection. With 8-channel high-current output (30amp), you can wire at least 8 devices to it. With external antenna for longer range, the theatrical working distance is 2000M (6000ft) in the open air. Actually, we design this controller for 2 Smartphone working systems— 4.6 ~ 6.1 version iOS and 2.1 ~ 4.0 version Android systems. We will illustrate the iOS system controlling lamp here. It must Work on the jailbroken iPhone, iPad, iPod Touch. Where there is Wi-Fi networking, there is this Wi-Fi controller. It Applied in modern agriculture field, smart home, instruments, equipment controlling. Wi-Fi remote control lights, motors, fan, electric doors / windows, aircraft, remote cars, remote toys, rolling blinds, pumps, winches, or other electrical devices with voltage AC110~240V or DC0~28V.
Let’s see the procedure. We have Wi-Fi controller, DC LED lamp, iPod, power adaptor.
WF-8-2R iOS material
Wire lamp to OUTPUT 1 and supply power to receiver. Lamp will get power through receiver.
wifi control dc lamp
WF-8-2R iOS wiring

After switching on power, wait until power led, ready led and link led turn on. So the Wi-Fi network is connected. After wireless network connection, press the icon of WIFI Controller software installed in advance to turn on it.
WF-8-2R iOS connection
Set up working mode for each channel of relay. Four working modes Toggle, Momentary, Latching and Time Delay are provided.
Set up Toggle control mode: Press the “T” icon of any channel. Choose T (Toggle) control mode.
WF-8-2R iOS shift mode
Press the icon and the color of icon changes to green, the corresponding relay will be on. Lamp is on.
WF-8-2R iOS lamp on
Press the icon again, the relay will be off. Lamp is off.
WF-8-2R iOS lamp off
Set up Time Delay control mode: Press “0s” icon of any channel. Enter the delay time, then press “Ok” icon. The adjustable delay time is range from 1 second to 99 hours. For example, if you want 5 seconds delay time, you can set 5 (s).
WF-8-2R iOS time delay setting
Press the icon, lamp is on.
WF-8-2R iOS time delay on
After 5 seconds, the lamp will be off automatically.
WF-8-2R iOS time delay off
Video:
Online shop: www.carymart.com