12VDC 6-Button Transmitter for 6 Water Motorbikes

Question from customer:

I would like to find a solution to control 6 water motorbikes (12 V). The idea is that from the beach, I am able to shut down the switch of a user that is getting wild or getting to close to danger. So the longest the control distance is much better.

Answer:

We recommend six 12VDC direct power output receivers (S1XB-DC12-ANT2) with the long distance remote (CB-6). Input power and output power of receiver are same as dc 12v. So it is easy for wiring. The receiver can use the water motorbike’s battery to operate and controlled water motorbike also can get power through receiver. The usage is also very simple. There are 3 working modes setting in the remote control. They are toggle, momentary and latched. But as for you, you have to use toggle mode. Press button, turn on device; Press button again, turn off device.

Working distance of remote and receiver set is 2000m (6000ft) in open field if we add external extended antenna in it.

Controlling 6 water motorbikes , you need 6 receivers. Wire each water motorbike’s motor to each receiver as the following picture shown.

When any of water motorbikes is getting wild or getting to close to danger, you can press any button to stop any of them to prevent from accidents. What’s more, it is the long range remote control which can help you control water motorbikes long distance.

Online shop: www.carymart.com

Hidden TV Set Panels is Controlled by iOS Phone WIFI Controller

Keep from mositure or dust, we usually use slide panels to protect TV set, you can use our utility Smartphone WIFI Controller to open or close slide panels. WLAN WIFI is extensively used nowadays, so we combine remote controller with WIFI network to make useful sort of product.  If you use this WIFI controller, only to use your cell phone as a transmitter, you can control your device within a reliable distance with WLAN.

It is applied in smart home, instruments, equipment control and modern agriculture field. WIFI remote controller controls many kinds of lights, motors, fans, electric doors/windows, aircraft, cars components, toys, rolling blinds, water pumps, winches or other electric devices with voltage AC110~240V or DC0~28V by its normally open and closed terminals.

This WIFI controller supports both 2.1 ~ 4.0 version Android software system and 4.6 ~ 6.1 version iOS software system. And we’d like introduce how to control DC motor under the iOS system. This controller works on the jailbroken iPhone, iPad, iPod Touch. Let’s see the procedure.

Here is the wiring diagram and picture. Motor is connected to common terminal ”B”. And normally open terminal“C” is connected to positive wire. Normally closed terminal “A” is connected to negative wire.

After finishing wiring, we switch on power. The LEDs of “Power”, “Ready” and “Link” are on one by one. We begin to operate.

After wireless network connection, press the icon of WIFI Controller software to turn on it.

There are 3 modes in common use. They are toggle, momentary and latched. But we usually use momentary for motor controlling.

Press and hold button 1, it is the motor’s positive rotation. Release button 1, it is motor’s stop.

Press and hold button 2, it is the motor’s reverse rotation. Release button 2, it is motor’s stop.

Video:

[youtube]http://www.youtube.com/watch?v=DdwwR96LP_Y&feature=youtu.be[/youtube]

Online shop: www.carymart.com

Long Range Control Hot Water Pump with Time Delay

Question from customer:

I want to use one device to turn on a hot-water circulator in my home for 15 minutes&then have it automatically turn off. I live in a 2 story wood home&the hot-water circulator is in the basement-maybe a distance of about 30 ft away through drywall&wood flooring. Will it work over this distance? Would I need to order a telescopic antenna?

Answer:

We think this product may be suitable for you– 1 channel ac delayed remote unit (0020483 S1DA-AC220-ANT2+CB-2). This kind of remote unit is with time delay timer, which you can adjust time according to your requirement. With external extend magnetic antenna, working distance of transmitter and receiver will reach 2000m/6000ft (theoretically).So you don’t have to order telescopic antenna.

Wiring program is as follow:

We connect delayed remote unit to circulator pump. The receiver is relay output (normally open and normally closed). Power supply for the receiver and the water pump are different. That means it will not cause electromagnetic interference during water pump operation.

Operation:

Press big button: Turn on relay (connect B and C, disconnect A and B). After delay time: Turn off relay by itself (disconnect B and C, connect A and B). Press small button: Turn off relay immediately, no need to wait for delay time.

Press buttons of “＋” and “－” on the timer, adjust delay time from 0 second to 99 hours. “H” is Hour, “M” is Minute, and “S” is Second. As your requirement, you can set “M 1 5”, it means the delay time is 15 minutes. After working for 15 minutes, it will be off automatically. Then the circulator pump stops pumping.

Online shop: www.carymart.com

Motor Rotation in Positive and Reverse Direction

We are going to demonstrate that our 30 A high power remote controller controls high power motor to rotate in positive and reverse direction.

This kind of controller is activated by dc 12v power supply with 30 A current output of each relay. It is very favorable for high power device. It also has four working modes including toggle mode, momentary mode, latched mode as well as momentary + toggle mode.

First of all, let’s see material preparation.

1 x 2 channel dc high power remote control receiver (S2PU-DC12)

1 x 2-button remote transmitter(C-2)

2 x dc12v power adapters

Some lines

Secondly, see the wiring diagram below, B is normally open terminal; C is normally closed terminal and A is common terminal. Connect terminal C to the positive and connect terminal B to the negative. Terminal A is supposed to be connected to the motor.

Note: The Power supply of receiver and motor must be provided individually in order to avoid interference between them.

Switch on the power

Operation:

Press and hold button 1, the motor rotates in positive direction; Release button 1, motor stops rotating.

Press and hold button 2, the motor rotates in reverse direction; Release button 2, motor stops rotating.

Short Video:

[youtube]http://www.youtube.com/watch?v=17pF9ZpMpwM&feature=youtu.be[/youtube]

Online shop: www.carymart.com

A Easy Way to Control High Current Load Motor Remotely

Reversing dc motor can be applied to rolling blinds / doors, projection screens, awnings. Pumps, winches, conveyors or other high power electrical appliances and equipment can be run by ac high current load motor.But how to remote control the high current load motor? Under this circumstance, we usually adopt contactor to help starting when we try to start high current load motors. A contactor is an electrically controlled switch used for switching a power circuit, similar to a relay except with higher current ratings. Contactors are heavy-duty with overload protection devices used for switching electric motors, lighting ,heating, capacitor banks , and other electrical loads.

Here take ac high power motor for example.

Firstly you need to prepare:

1 x 1 channel receiver in ac 220v (specially design for motor forward and reverse rotation)

1 x 4 buttons transmitter

2 x contactors

AC power supply

Some lines

The motor controller contains one transmitter and one receiver.

It features forward-reverse-stop capability. You can rotate the motor in forward or reversal direction by transmitter from any place within a reliable distance; wireless signal pass through walls, floors and doors.

Wiring:

Two contactors will act as a bridge between remote controller and high power motor to help activate high power motor to rotate in positive and reversal position.

Operation:

Press button ▲ on remote: Motor rotates continuously in positive direction.

Press button ■ on remote: Stop the motor.

Press button ▼ on remote: Motor rotates continuously in reversal direction.

Press button ■ on remote: Stop the motor.

Online shop: www.carymart.com

How to Make Simple Home Hot Water Circulating System with Time Delay Function

Question from customer:

I have a hot water circulating pump: 115V AC 0.4A. I want to be able to turn it on from 3 different locations within the house and have it turn itself off after 2 to 3 minutes. Do you have any equipment which will do this?

Answer to this question:

We think this product may be you want – ac1 channel time delay remote module 0020483 (S1DA-AC220-ANT2 & CB-2). The receiver is relay output (normally open and normally closed). Power supply for the receiver and the water pump are different. That means it will not cause electromagnetic interference during water pump operation. With the external extend antenna, the RF signal can pass through walls and doors as well as floors.

The wiring diagram is shown below.

The water pump will be connected to normally open terminals “B&C”.

After wiring, press buttons of “＋” and “－” on the timer, adjust delay time from 0 second to 99 hours. “H” is Hour, “M” is Minute, and “S” is Second. As you said, we set 3 minutes.

So we set “M 0 3”, it means the delay time is 3 minutes. Press big button: Turn on hot water circulating pump. It will stop working by itself after 3 minutes. You can also press small button to turn it off immediately.

According your requirement, one receiver can be paired with 3 transmitters. Any of transmitters can remote control the pump. You are able to turn it on from 3 different locations within your house and have it turn itself off after 2 to 3 minutes by itself.

So your home hot water circulating system will be like this.

Online shop: www.carymart.com

Pool Cover Remote Controllable by Controller

Question from customer:

I need an RF remote controller for a pool cover. This has to be heavy duty and be able to handle 15AMP.  I need a forward-reverse, however, it needs to stop immediately without time delay.

Answer:

 

With the benefits of safety, convenience, water conservation, energy efficiency and easier maintenance, swimming pool covers have increased being used for many families recently. People prefer to use automatic pool cover. Automatic covers cover and uncover the pool by pushing a button which makes more convenience. Have you ever thought about control your pool cover within a reliable distance with remote controller? That is the remote controllable automatic pool cover. But how to remotely control pool cover?

First we need a receiver box to install to motor of your pool cover and a transmitter to instruct the receiver to work. So remote controllable a pool cover, maybe you are looking forward to knowing how it work.

This handy gadget can make high power AC motor rotate forward and reverse.

Here is the wiring picture:

Operation:

We aim to how to make this remote controllable automatic pool cover work in this step.  After wiring, we press button A to open pool cover with motor rotate in forward direction. Press button C, the motor stop rotating. We press button B to close pool cover with motor rotate in reversal direction. Press button C, the motor stop rotating.

Through remote controlling motor of pool cover rotate forward and reverse, we can control it open or close in a reliable distance anytime.

Online shop: www.carymart.com

An easy way to control a winch remotely

We usually use winch to help us to hoist heavy stuff to higher place or drop to lower place. For example, farmers always store the grain in the warehouse in every harvest season. But the warehouse sometimes is an attic. They usually have to hoist grain bag to the attic by themselves in the past. Actually, that is energy-consuming working. It is too difficult for aged farmers to hoist those heavy bags of grains now. So they want to know if there is an easier way to hoist grain.

This set of controller which is designed for remote coontrolling motor rotating,is strongly recommended here.

The major characteristic of this receiver is to make the motor in the winch rotate in positive and reversal direction. That is to say, the rope of winch will be stretched out and drawn back by wireless remote controller. The transmitter is also easy to use.

Here are transmitter and receiver.

From the wiring picture, the wires from the winch are connected to the receiver. We hook up the bag, pressing and holding button ▲ on transmitter. With the motor of winch working continuously in the “UP” direction, the rope is drawn back and the bag is lifted; When the bag is hoisted to the attic, release button ▲, the motor of winch stops working. After putting away the grains bag, we press and hold button ▼ on transmitter, the motor works continuously in the “DOWN” direction , the rope is stretched out and then it reaches the ground.

Online shop: www.carymart.com

Motor Remote Control System Open Or Close 3 Awnings

Question:

I would like to have a centralized remote control system to open or close 3 awnings without going from here to there. The electric motor of awnings operate on 240V. Can you suggest something as a solution? Thanks.

Answer:

You can order 3 receivers for motor remote control model of S1FC-AC220 (operating voltage range is AC 100V ~ 240V); 3 external magnetic antennas 0020909, which are respectively installed to each receiver for longer remote distance; and one remote transmitter CB-4.

As you see in the picture of remote, button A can be set to control motor of awnings forward direction; button C can be set to control reversal direction. Buttons B and D can be set to stop the rotation.

Wiring diagram is as follow:

Connect live wire to terminal "L" and neutral wire to terminal "N". Then connect three wires of awning motor to terminals "UP", "COMMON" and "DOWN".

Press button A, 4 motors of awning rotate continuously in forward direction at the same time.
Press button B, rotation stops.
Press button C, 4 motors of awning rotate continuously in reversal direction at the same time.
Press button D, rotation stops.

Online shop: www.carymart.com