显示标签为“long range”的博文。显示所有博文
显示标签为“long range”的博文。显示所有博文

2015年11月11日星期三

Long range remote control well pump

We are looking for a wireless remote switch for our well pump at our cabin and I am wondering if one of your products could fit our needs. So quickly, our cabin is situated about 3/4 km from our water well pump. It’s pretty hilly and has trees in the way too. There is electricity at the pump head and right now we have to manually flick a on/off switch at the pump which is filling up the cistern in the house. Right now there is a timer at the pump which we can set so we don’t flood the house if we forget to flick it off. Ideally we would like to have a floating system in the cistern that would tell the pump to turn on/off wirelessly and when low/full or just having start for a small amount of time when low. I added a picture to the email to give you a better idea. Let me know if it's something you can help us with.
QQ图片20151112110512
According to the description and picture from this customer, we recommend him to choose model: 0020525. It is an automatic water pumping system.
1_01-copy
There are some remarkable characteristics of this new product. We add external extend antenna which makes the transmitting distance of this system as long as 3000m. There are two operation methods of this remote controller. The first method is to control water pump motor with manual controller. The second method is to control water pump motor automatically by two mini water level sensors.
The manual operation is fairly easy. When pressing the big button of the transmitter, CB-2, the “ON” signal will be sent to the receiver. The receiver will instruct water pump motor to pump water into the tank. When pressing the small button of the transmitter, CB-2, the “OFF” signal will be sent to the receiver. The receiver will instruct water pump motor to stop pumping water.
Pumping water automation by water level sensors is the highlight of this product. The key technology is the transmitter, CB-2N-2, which is designed to have 3 external wires. We named them wire 1, wire 2 and wire 3. The three wires will be connected to two mini water level sensors.
Let’s show you how it works.
First step, it is installation.
Put the water level sensor 1 downwards and install at the low water level position; Put the water level sensor 2 upwards and install at the high water level position.
picture-1
Two wires of the water level sensor 1 are connected to wire 1 and wire 3 of transmitter CB-2N-2.
Two wires of the water level sensor 2 are connected to wire 2 and wire 3 of transmitter CB-2N-2.
pumping-water-device-1
Motor should be connected to A&B terminal and L&N terminal of receiver S1PUA-AC220-ANT2.
receiver-1
Second step:
When water reaches the low water level, two wires of the water level sensor 1 is connected and the transmitter is triggered. The transmitter will send an ‘ON”’ signal to the receiver. The receiver will instruct the water pump motor to pump water into the tank.
picture-2
picture-3
When water reaches the high water level, two wires of the water level sensor 2 is connected and the transmitter is triggered. The transmitter will send an “OFF” signal to the receiver. The receiver will instruct the water pump motor to stop pumping water.
picture-4
Online shop: www.carymart.com

2015年11月6日星期五

Long Range Control Hot Water Pump with Time Delay

Question from customer:
I want to use one device to turn on a hot-water circulator in my home for 15 minutes&then have it automatically turn off. I live in a 2 story wood home&the hot-water circulator is in the basement-maybe a distance of about 30 ft away through drywall&wood flooring. Will it work over this distance? Would I need to order a telescopic antenna?
hot-water-circulator 2
Answer:
We think this product may be suitable for you– 1 channel ac delayed remote unit (0020483 S1DA-AC220-ANT2+CB-2). This kind of remote unit is with time delay timer, which you can adjust time according to your requirement. With external extend magnetic antenna, working distance of transmitter and receiver will reach 2000m/6000ft (theoretically).So you don’t have to order telescopic antenna.
1_01
Wiring program is as follow:
We connect delayed remote unit to circulator pump. The receiver is relay output (normally open and normally closed). Power supply for the receiver and the water pump are different. That means it will not cause electromagnetic interference during water pump operation.
S1DA-AC and pump
Operation:
Press big button: Turn on relay (connect B and C, disconnect A and B). After delay time: Turn off relay by itself (disconnect B and C, connect A and B). Press small button: Turn off relay immediately, no need to wait for delay time.
Press buttons of “+” and “-” on the timer, adjust delay time from 0 second to 99 hours. “H” is Hour, “M” is Minute, and “S” is Second. As your requirement, you can set “M 1 5”, it means the delay time is 15 minutes. After working for 15 minutes, it will be off automatically. Then the circulator pump stops pumping.
Online shop: www.carymart.com

2015年10月14日星期三

Long Range 2000M DC 12V Remote Control Boat Dock Lights

Question from customer:
I am installing 12v DC lighting on my boat dock. It will operate off a 12v battery with a solar charger. I need a long range on/off remote for the lights. My house is about 400 ft away. I have no AC power at the dock. I was planning on two 12 v lights.
dock lights
Answer:
We recommend you 2 one-many-system single channel receivers (S1UB-DC12-ANT2) and the long range remote (CB-2). The DC power activated remote is so favorable to you since you have a 12V battery with solar charger. The one-many-system means that you can use one transmitter control more than two receivers. There is no interference between two receivers because they are powered by different adaptors. With external extended antenna, working distance of remote controller extends 1500m, up to 2000m without any obstacles in the open field. So it is believed that the signal can be transmitted from your house to the dock successfully.
We make a presentation of this kind of remote. First, here is the material preparation.
2×1 channel receiver (S1UB-DC12-ANT2)
1×long range transmitter(CB-2)
2×LED light(DC 12V)
2×12V adaptor
Some lines
S1UB-DC12-ANT2&CB-2 material
The wiring is so simple. Each receiver is connected to LED light and adaptor. Switch on the power.
S1UB-DC12-ANT2&CB-2-wiring
S1UB-DC12-ANT2&CB-2-power on
Press big button, turn on the red light(dock light).
S1UB-DC12-ANT2&CB-2-red lamp on
Press big button again, turn off red light(dock light).
S1UB-DC12-ANT2&CB-2- red lamp off
Press small button, switch on blue light(dock light).
S1UB-DC12-ANT2&CB-2 blue lamp on
Press small button again, switch off blue light(dock light).
S1UB-DC12-ANT2&CB-2-blue lamp off

Enjoyable Video:
[youtube]http://www.youtube.com/watch?v=dVBhAciIlnc&feature=youtu.be[/youtube]

Online shop: www.carymart.com