Wireless Remotely Control 4 spotlights in the Stadium

A PE teacher from a football training school intended to look for remote control system to switch on and off 4 big spotlights in the stadium. Spotlights’ switch was installed on a wall outside of stadium gate. He must go to touch the manual switches one by one when he had PE class in the stadium. So he would like to have a set of remote controller to control spotlights.

According his requirement, we suggest this high power remote control system with 30amp maximum working current. It contains 4-channel high power ac output receiver and one great range 4-button remote transmitter. Working distance of this set is 2000m (6000ft) in the open air with external magnetic mount antenna.

Wiring is fairly simple. Do as the following picture shows. Wire each spotlight to each relay; use transmitter to remote control them. Four buttons control corresponding spotlight respectively.

Online shop: www.carymart.com

Wireless Remote Control Pond Fountain Solenoid Valve and Spotlights

Question from customer:

Can you help me select the correct product? The distance is 600 feet through house walls and some trees. I need to turn on a 220 volt pond fountain. There is a solenoid valve connecting to the spray head of the fountain. I also want to turn on at least three other dc 12 volt circuits separately for lights.The control panel has a switch on it right now that I would like to be able to still use if necessary.

Answer to this question:

We recommend this multi-mode great range remote control kit—S4U-AC220-ANT2+ CB-4. It has four working modes. They are toggle mode, momentary mode, latched mode as well as toggle& momentary mode. You can choose any of them according to your own requirement. The working distance is up to 2000m (6000FT) in open air with external mount antenna. It is very appropriate for outside pond fountain. There are totally four channels. It is 10amp current for each channel. The working voltage range of relay is AC 110—240V or DC0~28V. The highlight of this product is that it can activate different electrical devices with different working voltage simultaneously.

We make a demonstration of this remote controlling.

Let’s look at the following material.

As seen in the picture, three spotlights should be connected three relays’ normally open terminal individually and be supplied DC 12 V power supply. The pond fountain will be connected to last one relay’s normally terminal and be supplied AC220V power supply.

There are 4 buttons on the transmitter. One button controls one relay. Usually, we set “Toggle Mode”.

So press button “A”, turn on the led light strip 1.

Press button “B”, turn on the led light strip 2.

Press button ‘C”, turn on the led light strip 3.

Press button “D”, turn on the solenoid valve.

Press buttons one by one again to switch off all of them.

Online shop: www.carymart.com