12VDC 6-Button Transmitter for 6 Water Motorbikes

Question from customer:

I would like to find a solution to control 6 water motorbikes (12 V). The idea is that from the beach, I am able to shut down the switch of a user that is getting wild or getting to close to danger. So the longest the control distance is much better.

Answer:

We recommend six 12VDC direct power output receivers (S1XB-DC12-ANT2) with the long distance remote (CB-6). Input power and output power of receiver are same as dc 12v. So it is easy for wiring. The receiver can use the water motorbike’s battery to operate and controlled water motorbike also can get power through receiver. The usage is also very simple. There are 3 working modes setting in the remote control. They are toggle, momentary and latched. But as for you, you have to use toggle mode. Press button, turn on device; Press button again, turn off device.

Working distance of remote and receiver set is 2000m (6000ft) in open field if we add external extended antenna in it.

Controlling 6 water motorbikes , you need 6 receivers. Wire each water motorbike’s motor to each receiver as the following picture shown.

When any of water motorbikes is getting wild or getting to close to danger, you can press any button to stop any of them to prevent from accidents. What’s more, it is the long range remote control which can help you control water motorbikes long distance.

Online shop: www.carymart.com