Question:
I would like to have a centralized remote control system to open or close 3 awnings without going from here to there. The electric motor of awnings operate on 240V. Can you suggest something as a solution? Thanks.
Answer:
You can order 3 receivers for motor remote control model of S1FC-AC220 (operating voltage range is AC 100V ~ 240V); 3 external magnetic antennas 0020909, which are respectively installed to each receiver for longer remote distance; and one remote transmitter CB-4.
As you see in the picture of remote, button A can be set to control motor of awnings forward direction; button C can be set to control reversal direction. Buttons B and D can be set to stop the rotation.
Wiring diagram is as follow:
Connect live wire to terminal "L" and neutral wire to terminal "N". Then connect three wires of awning motor to terminals "UP", "COMMON" and "DOWN".
Press button A, 4 motors of awning rotate continuously in forward direction at the same time.
Press button B, rotation stops.
Press button C, 4 motors of awning rotate continuously in reversal direction at the same time.
Press button D, rotation stops.
Press button B, rotation stops.
Press button C, 4 motors of awning rotate continuously in reversal direction at the same time.
Press button D, rotation stops.
Online shop: www.carymart.com
没有评论:
发表评论