4-Channel Multi-Mode DC 24V RF Remote Control Solenoids and Linear Actuators

Question from customer:
I need to remotely control two on/off solenoids and two linear actuators on my truck. They are all actuated by 24V power supply in my truck. Do you have a system that will do this?


Answer:
We recommend the model of 4 channel multi-mode 24V remote control (S4U-DC24+C-4). This kind of remote control is 4 channels with multi-modes, which includes toggle, momentary, latched and momentary+toggle. It is flexible choice for you. You can choose the 24V actuated remote control since there is 24V power in your truck. The working distance is about 100M.

Then connect 2 linear actuators to channel 1 and 2 in parallel, connect two on/off solenoids to channel 3 and 4 respectively. You can set the receiver to Momentary (Channel 1~2) + Toggle (Channel 3~4) control mode.
The wiring is just a little complicated. Please see the wiring diagram below, B is common terminal. Each linear actuator motor is supposed to be connected to B terminals of relay 1&2. A is normally closed terminal and C is normally open terminal. Connect terminal C to the positive and connect terminal A to the negative. Each solenoid is connected to B&C terminals of relay 3&4.

After wiring, you can control them by the transmitter C-4.
Press and hold button 1, linear actuators move forward together, release the button 1, linear actuators stop together.
Press and hold button 2, linear actuators move backward together, release the button 2, linear actuators stop together.
Press button 3, turn on solenoid 1. Press button 3 again, turn off solenoid 1.
Press button 4, turn on solenoid 2. Press button 4 again, turn off solenoid 2.

Online  shop: www.carymart.com

4 Channel DC12V Multi-mode Remote Controller Practical Operation

Through learning or deleting code from transmitter to receiver, we can shift working mode easily. Different mode is applied for different controlling. Toggle mode is used for controlling lamp, doors, locks…Momentary is used for controlling rolling blind, shutter, rolling door…As regards the latched mode, it is motivated by relay group. Latched mode is available for long distance controlling (no line of sight, lots of trees or other obstacles in-between). And there is mixed mode of toggle+momentary. A relay group is toggle mode, the other relay group is momentary mode.

Here, we’d like to introduce the procedure of 4 working modes’ practical operations (4 Channel 12V multi-mode remote control).

Toggle mode: Connect jumper to CN2, set toggle control mode.

Press any buttons to control corresponding lamp on and off.

Press button 1, turn on lamp 1.

Press button 1 again, turn off lamp 1.

Momentary mode: Connect jumper to CN1, set momentary control mode.

Press any buttons to control corresponding lamps on and off. Such as: Press and hold button 2, turn on lamp 2; release button 2, turn off lamp 2.

Press and hold button 3, turn on lamp 3; release button 3, turn off lamp 3.

Latched mode: No jumper connect, set latched control mode.

Press any buttons to control corresponding lamps on and off. Such as: Press button 1, turn on lamp 1. Other lamps are off.

Press button 2, turn on lamp 2. Other lamps are off...

Momentary+Latched mode: Connect jumper to CN1 and CN2, set momentary and latched mode.

Press corresponding buttons to corresponding operation

Momentary Mode：(Channel 1~2)

Toggle Mode:(Channel 3~4)

Video:

[youtube]http://www.youtube.com/watch?v=CwtBQJTTsnM&feature=youtu.be[/youtube]

Online shop: www.carymart.com