显示标签为“motor remote control”的博文。显示所有博文
显示标签为“motor remote control”的博文。显示所有博文

2015年10月14日星期三

2 Channel Motorized Remote Controls Skylight and Water Pumps


Question from customer:
I have a project to install 1 linear dc actuator to control my skylight and 2 small water pumps. So I need to control from a remote. Both pumps need a remote switch for either on or off; 1 actuator needs a remote switch to up and down.
skylightmotor
Answer:
We recommend you 2 motorized remote receiver (S2U-DC12) and 4 button transmitter (CV-4). 2 receivers are connected to linear actuator and water pumps’ motor respectively. You can use one transmitter to remote control them easily. This kind of remote can control Lights, Motors, Fans, electrically operated doors / locks / windows / blinds / cars or other appliances with AC110~240V or DC0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. The working distance is about 500m.
We have made a presentation to show you how to install and operate.
We prepare the following material.
2×2 channel receiver(S2U-DC12)
1×4-button transmitter(CV-4)
1×linear actuator motor
2×dc motor
DC 12V power supplies
Some lines
2S2U-DC12&CV-4 material
Here is the wiring for linear actuator.
2S2U-DC12&CV-4 wiring for linear actuator
Here is the wiring for dc motor.
22U-DC12 &CV-4 wiring for dc motor
One receiver is connected to the linear actuator, the other is connected to 2 dc motors.
Operation:
We set momentary mode for linear actuator controlling and toggle mode for small motor because they only need to be switched on and off. It won’t generate interference for each other, even though we use the same transmitter to control 2 receivers.
Switch on power.
22U-DC12 &CV- power on
Press and hold button 1, the linear actuator moves forward(stretch out). Release button, it stops moving.
2S2U-DC12 &CV-4 button 1 stretch
Press and hold button 2, the linear actuator moves backward(draw back). Release button, it stops moving.
2S2U-DC12&CV-4 button 2 withdraw
In a word, press button 1 and button 2 can make the linear actuator to reciprocating movement in a straight line. The skylight can be open or close through its reciprocating movement.
Press button 3, turn on motor 1. Press button 3 again, turn off motor 1.
22U-DC12 &CV-4 button 3
Press button 4, turn on motor 2. Press button 3 again, turn off motor 2.
22U-DC12 &CV-4 button 4
Video:
[youtube]http://www.youtube.com/watch?v=SyP6zaNva1c&feature=youtu.be[/youtube]
Online shop: www.carymart.com

2015年9月28日星期一

2 Channel Motor Remote Controller Operate Electric Trailer and Winch

Question:
Our company manufactures a series of trailers that use 12vdc hydraulics to tilt and lower the decks. We also often install electric winches on trailers and are looking for a momentary remote to operate the trailer and the 12vdc electric winch.
Answer:
We think 2 channel dc motor remote controller model of 0020481 (S2PF-DC12 & CV-6) is suitable for you. It is used to control 2 12vdc motors rotating forward and reversal. Maximum working current is up to 30 Amp. This motor remote controller is applicable to control motors of heavy duty electrical devices and equipment, such as your electric trailer and winch.
Wiring diagram is as follow. Connect wires of 12vdc power supply to terminals "+" and "-"; connect wires of trailer motor to terminals "A1" and "A2"; connect wires of winch motor to terminals "B1" and "B2".
Setting momentary control mode: connect Jumper-1.
Press and hold button 1: trailer motor rotates in positive direction.
Release button 1: trailer motor stops.
Press and hold button 3: trailer motor rotates in reversal direction.
Release button 3: trailer motor stops.
Press and hold button 2: winch motor rotates in positive direction.
Release button 2: winch motor stops.
Press and hold button 4: winch motor rotates in reversal direction.
Release button 4: winch motor stops.
Online shop: www.carymart.com