Smartphone iOS System WIFI Controller for Bracket Lights

One of our customers said that he installed some bracket lights on the wall of stairs. He wanted to remote control all bracket lights but sometimes it is not convenient to him to have a transmitter.

We recommend him our Smartphone WIFI remote controller WF-8-1R (iOS system). It supports 4.6 ~ 6.1 version iOS software system. That is to say, if you use our WIFI remote control and install our WIFI software in your mobile phone. Your mobile phone will be a transmitter which can work with WIFI controller in pairs to control electric devices.
It is applied in modern agriculture field, smart home, instruments, equipment control. WiFi remote control lights, motors, fan, electric doors / windows, aircraft, remote cars, remote toys, rolling blinds, pumps, winches, or other electrical devices with voltage AC110~240V or DC0~28V.
The following is the presentation.
They are WIFI controller, iPod, AC lamp and 12V adaptor.

Wiring:
Connect AC lamp to the output terminals (B&C) of WIFI controller.

Software installation:
Install the WIFI Controller software to your iPhone, iPad or iPod Touch by iTunes.
Note: Your iPhone, iPad or iPod Touch must be jailbroken.

Switch on the power of WIFI controller. Wait until power led and wifi start-up led turn on. After wireless network connection, press the icon of WIFI Controller software to turn on it.

There are 3 modes in common use. They are toggle, momentary and latched. But we usually use toggle or latched for lighting controlling. And there is “Time Delay” mode in it. Here is the presentation of “Toggle” and ”Time Delay” mode to control AC lamp.
Toggle Controlling:
Set up Toggle control mode: Press the “T” icon of channel 1. Choose T (Toggle) control mode.

Press button 1 and the color of button 1 icon changes to green, AC lamp will be on. Press the icon again, the lamp will be off.


Time Delay Controlling:
Set up Time Delay control mode: Press “0s” icon of channel 1. Enter the delay time, then Press “Ok” icon. The adjustable delay time is range from 1 second to 99 hours. We set delay time 5 seconds.

Press button 1 to turn on the lamp.

After 5 seconds, the lamp is off by itself.

Time Delay mode is much better for you to control your bracket light. If you set the delay time in advance, you don’t have to switch off it again because it is off automatically when delay time is up.
Video:
[youtube]http://www.youtube.com/watch?v=XM4nepjORHI&feature=youtu.be[/youtube]

Online shop: www.carymart.com

Utility Smartphone WIFI Controller for iOS Control DC Electric Curtain Motor

Electric curtains may be installed in many families. Compared with traditional curtain, electric curtain is very convenient to people. We can use remote controller to control it. In case, your remote controller is broken or you want to DIY electric curtain, you can use our utility Smartphone WIFI Controller. WLAN WIFI is extensively used nowadays, so we combine remote controller with WIFI network to make useful sort of product.  If you use this WIFI controller, only to use your cell phone as a transmitter, you can control your device within a reliable distance with WLAN.

It is applied in smart home, instruments, equipment control and modern agriculture field. WIFI remote controller controls many kinds of lights, motors, fans, electric doors/windows, aircraft, cars components, toys, rolling blinds, water pumps, winches or other electric devices with voltage AC110~240V or DC0~28V by its normally open and closed terminals.

This WIFI controller supports both 2.1 ~ 4.0 version Android software system and 4.6 ~ 6.1 version iOS software system. And we’d like introduce how to control DC motor under the iOS system. This controller works on the jailbroken iPhone, iPad, iPod Touch. Let’s see the procedure.

Here is the wiring diagram and picture. Motor is connected to common terminal ”B”. And normally open terminal“C” is connected to positive wire. Normally closed terminal “A” is connected to negative wire.


After finishing wiring, we switch on power. The LEDs of “Power”, “Ready” and “Link” are on one by one. We begin to operate.


After wireless network connection, press the icon of WIFI Controller software to turn on it.

There are 3 modes in common use. They are toggle, momentary and latched. But we usually use momentary for motor controlling.

Press and hold button 1, it is the motor’s positive rotation. Release button 1, it is motor’s stop.

Press and hold button 2, it is the motor’s reverse rotation. Release button 2, it is motor’s stop.

Video:
[youtube]http://www.youtube.com/watch?v=DdwwR96LP_Y&feature=youtu.be[/youtube]

Online shop: www.carymart.com

Voltage Output Smartphone Wi-Fi Controller Controls AC Lamp (Android System)

Wi-Fi is a sort of short-area wireless networking, which is available in home or other public places, such as canteens, shopping malls, parks, theatres, cinemas. It can allow computers, Smartphones and other gadgets to access to internet without a wired connection. Our product is combined Smartphone with remote receiver via Wi-Fi networking to make Smartphone Wi-Fi Controller.

This kind of Wi-Fi controller is 30amp high current and ac or dc voltage direct output, that is to say, you don't need to connect the controlled devices to its own power source. They will get through this receiver. It supports 2.1~4.0 version Android Software system and 4.6~6.1 version iOS software system. Here, we will show you how to use this Wi-Fi controller control AC lamp under Android system.
Let’s go through the procedure. Here is the material.

Wiring is fairly simple. You can wire ac lamp to the Output 1 as the wiring diagram shown. There are 8 Output terminals, so you can wire at least 8 devices.


After finishing wiring, we turn on power. The LEDs of “Power”, “Ready” and “Link” are on one by one. We begin to operate. After wireless network connection, press the icon of WIFI Controller software to turn on it.


There are 4 working modes in it, which includes Toggle, momentary, latched and time delay modes. Toggle mode is used to control lights.

Press button 1, turn on lamp.

Press button 1 again, turn off lamp.

Video:
[youtube]http://www.youtube.com/watch?v=xN9I2--Yph8&feature=youtu.be[/youtube]

Online shop: www.carymart.com

8 Channel Voltage Output Smartphone Wi-Fi Controller Controls AC Lamp (iOS System)

Many people use iOS system launched by Apple Inc because it is fashionable, easy to use, and convenient. It is also applied for other apple devices such as iPod Touch, iPad other than iPhone. And Wi-Fi is Wireless Local Area Network which is easier to get access to network to surf. Most Smartphones can get access to network through Wi-Fi. Now we integrate Wi-Fi networking and device with iOS system to develop a brand new product, Smartphone Wi-Fi Controller.

It works under Wi-Fi connection. With 8-channel high-current output (30amp), you can wire at least 8 devices to it. With external antenna for longer range, the theatrical working distance is 2000M (6000ft) in the open air. Actually, we design this controller for 2 Smartphone working systems— 4.6 ~ 6.1 version iOS and 2.1 ~ 4.0 version Android systems. We will illustrate the iOS system controlling lamp here. It must work on the jailbroken iPhone, iPad, iPod Touch. Where there is Wi-Fi networking, there is this Wi-Fi controller. It Applied in modern agriculture field, smart home, instruments, equipment controlling. Wi-Fi remote control lights, motors, fan, electric doors / windows, aircraft, remote cars, remote toys, rolling blinds, pumps, winches, or other electrical devices with voltage AC110~240V or DC0~28V.

Let’s see the procedure. We have Wi-Fi controller, AC lamp, iPod, power adaptor.

Wire lamp to OUTPUT 1 and supply power to receiver. Lamp will get power through receiver.

After switching on power, wait until power led, ready led and link led turn on. So the Wi-Fi network is connected. After wireless network connection, press the icon of WIFI Controller software installed in advance to turn on it.

Set up working mode for each channel of relay. Four working modes Toggle, Momentary, Latching and Time Delay are provided.

Set up Toggle control mode: Press the “T” icon of any channel. Choose T (Toggle) control mode.

Press the icon and the color of icon changes to green, the corresponding relay will be on. Lamp is on.

Press the icon again, the relay will be off. Lamp is off.

Set up Time Delay control mode: Press “0s” icon of any channel. Enter the delay time, then press “Ok” icon. The adjustable delay time is range from 1 second to 99 hours. For example, if you want 5 seconds delay time, you can set 5 (s).

Press the icon, lamp is on.

After 5 seconds, the lamp will be off automatically.

Video:

[youtube]http://www.youtube.com/watch?v=x1VbXss83xI[/youtube]

Online shop: www.carymart.com