A football field administrator is looking for remote control system to turn on and off 4 lights simultaneously in the football field. Because he doesn't want to touch the manual switches one by one in the control room. Working voltage of each light is 12vdc and the working power is 200w.
According to his requirement, we suggest him choose four dc power output heavy duty rf receivers 0020438 (S1PX-DC12-ANT2) and one long range 2 button remote 0021024 (CB-2). Input power and output power of receiver are same as dc 12v. So it is easy for wiring. Maximum working current is 30amp. Working distance of remote and receiver set is 2000m (6000ft) in open field. Wire each light to each receiver; use the remote to control all of them on and off.
As shown in image below, wire each light and dc 12v power supply to each receiver according to the wiring diagram.
The following step is to learn the remote to each receiver.
Press the learning button of receiver; signal LED keeps shining. The receiver enters into learning status. Then press any one button on remote control. Signal LED flashes quickly 15 times and turns off, learning is successful.
Operation is also quite simple.
Press big button on remote, four lights are turned on at the same time.
Press small button on remote, four lights are turned off.
Press small button on remote, four lights are turned off.
Online shop: www.carymart.com
没有评论:
发表评论