1 Channel DC Long Range Remote Control Gadget Controls Flashing LED to Scare Birds

Question from customer:

I want to use the 1 channel remote control to operate flashing LEDs in a tree to scare

birds in the evening from roosting.

Answer:

It is a good idea to scare birds from roosting in the evening by remote controlling a flashing LED because you must be very furious at noise to spoil your sweet dream or interfere with your other activities. Our suggestion is that you can choose this 1 channel dc triggered long distance remote gadget (S1X-DC12-ANT2+CB-2). You can wiring one flashing LED to relay channel. Flashing LED can get power from receiver directly. With external extended antenna, this remote gadget will transmit signal up to 2000m (6000ft) in the open field.

Here is the wiring diagram. Flashing LED is connected to terminals A&B of receiver. And supply power to receiver.

Operation:

There are two working modes for your information. They are momentary and latched modes.

1. Setting control mode Momentary: Only connect Jumper-1.

Press and hold big button: Turn on the relay, terminal A&B output DC power. The flashing LED will keep flashing constantly.

Release big button: Turn off the relay, terminal A&B no output. There is no flashing from LED.

2. Setting control mode Latched: Do not connect Jumper-1 and Jumper-2. Press big button: Turn on the relay, terminal A&B output DC power. The flashing LED will be remote controlled and keep flashing all the time.

Press small button: Turn off the relay, terminal A&B no output. The LED is off.

Online shop: www.carymart.com