Remote Control 12V Garden Lights and Pond Pump

Overview:

I'm interested in buying transmitters and receivers 12 volts for three garden lights and one pond pump, but could you please advise me on which accessories and channels I would need for this?

  

Solution:

We recommend 4 Channel DC Output Long Range Kit (S4X-DC12-ANT2 & CB-4L). 4 channels can output 12V power, so garden lights and pond pump can be wired to terminals of relays respectively. It is 10amps of each channel. The transmitting distance is up to 2000m (6000FT) in open air with external mount antenna. It is very appropriate for outside pond pump and garden lights.

Wire three garden lights and pond pump to four relay terminals one by one. Supply 12V power, switch on power. Receiver, garden lights and pond pump turn on immediately.

Setting control mode Toggle: (Only connect Jumper-2).

Press button A, turn on light 1; Press button A again, turn off light 1.

Press button B, turn on light 2; Press button B again, turn off light 2.

Press button C, turn on light 3; Press button B again, turn off light 3.

Press button D, turn on pond pump; Press button D again, turn off pond pump.

Online shop: www.carymart.com