Through learning or deleting code from transmitter to receiver, we can shift working mode easily. Different mode is applied for different controlling. Toggle mode is used for controlling lamp, doors, locks…Momentary is used for controlling rolling blind, shutter, rolling door…As regards the latched mode, it is motivated by relay group. Latched mode is available for long distance controlling (no line of sight, lots of trees or other obstacles in-between). And there is mixed mode of toggle+momentary. A relay group is toggle mode, the other relay group is momentary mode.
Here, we’d like to introduce the procedure of 4 working modes’ practical operations (4 Channel 12V multi-mode remote control).
Toggle mode: Connect jumper to CN2, set toggle control mode.
Press any buttons to control corresponding lamp on and off.
Press button 1, turn on lamp 1.
Press button 1 again, turn off lamp 1.
Momentary mode: Connect jumper to CN1, set momentary control mode.
Press any buttons to control corresponding lamps on and off. Such as: Press and hold button 2, turn on lamp 2; release button 2, turn off lamp 2.
Press and hold button 3, turn on lamp 3; release button 3, turn off lamp 3.
Latched mode: No jumper connect, set latched control mode.
Press any buttons to control corresponding lamps on and off. Such as: Press button 1, turn on lamp 1. Other lamps are off.
Press button 2, turn on lamp 2. Other lamps are off...
Momentary+Latched mode: Connect jumper to CN1 and CN2, set momentary and latched mode.
Press corresponding buttons to corresponding operation
Momentary Mode：(Channel 1~2)
Toggle Mode:(Channel 3~4)
Online shop: www.carymart.com