2015年10月7日星期三

High Capacity 24V Remote Controller for Bow and Stern Thruster in the Boat

Overview:
Can I use a radio system for bow and stern thruster in the boat? When pressing the keys on the transmitter, the motors must be supplied with continuous power; and after releasing the keys, the power must be immediately interrupted. I need a 24 volt system.
Solution:
We recommend two long range transmitters (CB-2N) and two high capacity 24V receivers (S1PU-DC24). You can connect one key to two wires of CB-2N, and connect DC 24V power and motor to the receivers S1PU-DC24. When you press and hold the key, the motor will be supplied with continuous power, and after releasing the key, the power will be immediately interrupted.
Wire motor to the normally open terminal A&B. Wire “A” terminal to negative pole of receiver output contact. Wire “B” terminal to positive pole of receiver output contact. And supply 24V power.
 
circuit-diagram
Transmitter is triggered by connection of two extended wires. When two wires are connected, RF signal will be sent out. It works with 1 channel high power receiver which enjoys 30amps current. So they can be used in high capacity device. It can remote control fans, electric operated doors/ locks/ windows/ blinds/ cars or other appliances with AC 110~240V or DC 0~28V or high amp load device other than bow and stern thruster motor.
Online shop: www.carymart.com

没有评论:

发表评论