Wireless calling system, which consists of calling button/transmitter and receiver host, adopts RF wireless and learning code technology. Usually, it can easily pair up to 999 channels of wireless calling transmitters and 1 manager remote controller. The receiver host uses advanced industrial micro processor and high-sensitivity superheterodyne receiving technology which makes products very stable.
At the same time, the wireless calling receiver host has advanced number speaker function and it can clearly read the number, function, room number and so on. It is compatible for different working mode, suitable for different places.
2-button desktop wireless calling button and wireless calling receiver can be paired up and work together.
This desktop wireless calling button has two buttons. Call: When you need general calling, you can press this button. Cancel: Press this button cancel previous calling.
Wireless receiver host can be controlled manually or remote control with manager transmitter.
We do some setting of this receiver host.
The First step:
Working mode setting:
Long press 2sec Button 1 of manager transmitter to enter settings mode; Use Button 3 or 4 to choose “Cd8”(Working mode setting) submenu. This display will show”0”, the press Button 3 or 4 to select the working mode.
Suppose we use it in the restaurant. So we select “3” (Room mode ). When you choose “3” mode, screen displays number 011 -999 for you to pair up with your calling button, sounds "Dingdong+Room 1-99+No.1 -9 call". After finish the setting , press button "2" of manager transmitter to previous menu or quit to standby status.
Note : After finish the function, please power off and restart the host to ensure the function is comfired.
The second step :
Calling Transmitter pairing :
You can use calling transmitter control the receiver host, but you need pair them up at first.
Press Button 1 of manager transmitter for 2 sec to enter "Cd7" submenu. Press Button 3 or 4 select one of the number, paired number must start from "011" for calling button, and then press "Call" button on the transmitter, the speaker will sound "successful registration" and the display screen turn to next number "012" automatically. Then you can continue to do the next pairing up to number 999 calling transmitter (Room mode) if you need. After finish the pairing, press button "2" of manager transmitter to previous menu or quit to standby status.
Note: 1) long press Button 3 or 4 of manager transmitter to jump the numbers quickly.
2) While the number is paired , the 4 corner LED indicators will be flicker, or not, if the LED indicators are off, it means that the number has no paired transmitter.
The third step :
Key switch mode setting :
Press Button 1 of manager transmitter for 2 sec to enter "Cd6" submenu. The display will show "5", then press Button 3 or 4 of manager transmitter to choose the key mode.
① "2" means 2- key mode, which is suitable for 1/2-button calling transmitters.
② "5" means 4- key mode, which is suitable for 1/3/4/5/6-button calling transmitters.
We choose 2-key mode for 2-button calling button.
After all the setting is finished, please power off the host and restart it again.
After all setting, we can start to use it.
In restaurant, when customer presses "Call" button, the receiver host will display "01 1" and make sound "Dingdong+Room 1+No.1 call". Press"Cancel" button to cancel previous calling, it won’t display “01 1” and turn back to standby status.
The wireless calling system has millions of different code which can be paired easily and freely.
And it is widely used in restaurant, cafe, bar, tea shop, KTV, bank, office, factory, hotel, hospital and so on.
Online shop: www.carymart.com
没有评论:
发表评论