AC 220V wireless system remote control shutter climb or descend

Question from customer:

I want to buy a radio system for my 9 shutters (220 V), wireless control, 9 receivers and 1 Remote, climb or descend in all my components by one remote.

Answer:

We introduce the wireless remote control system to you according to your requirement. It is model: S1FM-AC220 & CB-2. The receiver’s (S1FM-AC220) working voltage is AC 100~240V. The transmitter (CB-2) is 2 channels and remote control distance is 1000m/3000ft theoretically. If you want to remote control shutter, you need to mount receiver to the motor of shutter. Then you can use the wireless transmitter to remote control shutter climb or descend by controlling motor rotates. Besides you can use one transmitter to remote control 9 receivers at the same time because of one transmitter can remote control several receivers simultaneously.

Here is the circuit diagram of receiver. Firstly you need to connect live wire to “L” terminal and neutral wire to “N” terminal. Secondly you can connect AC motor of shutter’s the top of slot to terminal “UP”, “COMMOM” and “DOWN” of receiver. Then supply power to receiver. When you press the button of transmitter, the motor will rotates and drives the winder of shutter. The shutter will climb or descend by wireless remote control.

 

This is the operation procedure of wireless remote control system:

When you press and hold big button of transmitter: Terminals UP and COMMOM directly output AC110V / AC220V; motor rotates continuously in positive direction; shutter climb.
Release button: Stop the motor.

When you press and hold small button of transmitter: Terminals DOWN and COMMOM directly output AC110V / AC220V; motor rotates continuously in reversal direction; shutter descend.
Release button: Stop the motor.

Finally you can also enter into our website and search the wireless remote control system as following:

Model: S1FM-AC220 & CB-2

Website:

http://www.carymart.com/