DIY Christmas tree

Since Christmas is coming soon. We hope to DIY Christmas tree by ourselves. So we use a wireless remote control kit and some lights to decorate a small tree. Apart from receiver and transmitter, the mobile WiFi controller can also be used to wireless remote control Christmas tree. Next time, we will try to used iphone6s to remote control something.

The model of the remote control kit: 0020424

Online shop: www.carymart.com

Email: katherinexjy@gmail.com

Skype: gysyxjy

DIY: Christmas light

Momentary Remote Ignite Firework

We have promoted our new product 1 CH RF remote system for pyrotechnics. It can ignite various kinds of electric fireworks directly or ordinary firework through fireworks electric ignitors, or light momentary fireworks, which reduces accidents like skin burn and accidental explosions. However, launching this momentary firework will be more dangerous because it is sparked in a second and its sparks can fly 2 meters high. We will try to ignite momentary firework with this kind of remote system. It is much safer method to ignite firework.
It contains 1-button remote transmitter and 1-channel receiver. Wire the momentary firework to the receiver, the momentary firework can be remotely controlled by remote transmitter from any place within a reliable distance; wireless signal pass through walls, floors and doors.

Firstly, we should prepare some material. Look at the following picture below. There are firework system, one-button transmitter and momentary firework.

Connect wire of momentary firework to black and red terminals on receiver.

Turn on the power switch on receiver. Press button, ignite momentary firework.

Caution:
Any inflammable and explosives material must be far away when igniting fireworks.
Anyone is far away from the firework more than 50m when it is ignited.
Short Video:
[youtube]http://www.youtube.com/watch?v=JRzOjCoXg3w[/youtube]
Online shop: www.carymart.com

Wireless High Power Remote Switches On or Off a 30A Relay

One customer came to us to find a 12V high power remote which is able to turn on or off a relay 12V30A. He said that he has tried other brand products but they didn’t work well because they were not high power and didn’t activate his relay. He is wondering whether there are any favorable products at our end.
We recommend this model of wireless high power remote switch (S1PU-DC12+2C-2) to him.

One channel is for one device. It is favorable for the device which working current is 30A. Control Lights, Motors, Fans, electrically operated Doors/ Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. There are three working mode for your choice. They are Toggle, momentary and latched modes.
Setting control mode Toggle: Only connect Jumper-1.
Press button 1: Turn on the relay
Press button 1 again: Turn off the relay

Setting control mode Momentary: Only connect Jumper-2.
Press and hold button 1: Turn on the relay
Release button 1: Turn off the relay

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.
Press button 1: Turn on the relay
Press button 2: Turn off the relay
As for wiring, please see the wiring diagram. A,B terminals are normally open; A,C terminals are normally close. So being controlled device should be connected to A,B terminals. This device can be activated by dc 0~28V or ac 110~240V. Besides this, the receiver should be supplied dc 12V power supply.

Online shop: www.carymart.com

1 Channel 24V RF Remote Controller Controls Ignition of a Beacon

A beacon is a light or fire on the hill or tower which acts as a signal or a warning to help guide navigator to their destination with safety. One customer said, “I'm looking for a system which can remotely control (200m max) ignition of a beacon in 24 V dc”.

We recommend him the model of single channel 24V power output RF remote (S1X-DC24-ANT2 +1CB-2). Single channel is for one device. 24V direct power output can supply power directly to the device which is controlled. User can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. The receiver, which mounts long range magnetic antenna, pairs with long distance transmitter to reach to 2000m in the open field.

There are 3 control modes. They are Toggle, momentary and latched.
Setting control mode Toggle: Only connect Jumper-2.
1) Press big button: Turn on the relay.
Press big button again: Turn off the relay.
2) Setting control mode Momentary: Only connect Jumper-1.
Press and hold big button: Turn on the relay.
Release big button: Turn off the relay.
3) Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
Press big button: Turn on the relay.
Press small button: Turn off the relay.
As regards controlling beacon, we suggest the latched mode. Press big button to turn on beacon light, press small button to turn off the light.
For the wiring, it is so simple. The following picture shows. Lamp is connected to terminals A&B on the receiver. The receiver should be supplied 12V power. There is no need to supply power to lamp because lamp can get power from the receiver.


Online shop: www.carymart.com

Mobile Phone WIFI Controller Controls Drawer Lock

When you unlock your drawer lock, maybe you will take out the mechanical key and unlock the mechanical drawer lock as usual. At this very moment, have you imaged that you can use mobile WIFI to unlock drawer lock? It is quite convenient, easy and leisurely. Mobile phone WiFi controller, which is our brand new product, is working at WiFi network which has 8 relays to connect 8 devices. With external extended antenna, it is a long distance controller. Another advantage of it is to penetrate through walls, doors or other obstacles. Let’s see how to do with it.

First, we prepare materials and do some wiring.
1×WiFi controller (WF-8-1R)
1×mobile phone (Android System)
1×electric drawer lock
Power supply
Some lines

This is the simple wiring. We connect drawer lock to the receiver’s power with lines. That is to say ,the receiver can supply power to drawer lock.

After simple wiring, we switch on the power. The power LED light is on. With the shining of the WiFi start-up LED light, we turn on WiFi of mobile phone. The WiFi connection status LED light is on. We press the control software installed in the mobile phone and press the ”Connect”.

Press button 1, drawer is unlocked; Open the drawer.

Press button 1 again, lock the drawer.

Operation Video:
[youtube]http://www.youtube.com/watch?v=IDdif0NV2Jk&feature=youtu.be[/youtube]

Online shop: www.carymart.com

Long Range 2000M DC 12V Remote Control Boat Dock Lights

Question from customer:
I am installing 12v DC lighting on my boat dock. It will operate off a 12v battery with a solar charger. I need a long range on/off remote for the lights. My house is about 400 ft away. I have no AC power at the dock. I was planning on two 12 v lights.

Answer:
We recommend you 2 one-many-system single channel receivers (S1UB-DC12-ANT2) and the long range remote (CB-2). The DC power activated remote is so favorable to you since you have a 12V battery with solar charger. The one-many-system means that you can use one transmitter control more than two receivers. There is no interference between two receivers because they are powered by different adaptors. With external extended antenna, working distance of remote controller extends 1500m, up to 2000m without any obstacles in the open field. So it is believed that the signal can be transmitted from your house to the dock successfully.
We make a presentation of this kind of remote. First, here is the material preparation.
2×1 channel receiver (S1UB-DC12-ANT2)
1×long range transmitter(CB-2)
2×LED light(DC 12V)
2×12V adaptor
Some lines

The wiring is so simple. Each receiver is connected to LED light and adaptor. Switch on the power.


Press big button, turn on the red light(dock light).

Press big button again, turn off red light(dock light).

Press small button, switch on blue light(dock light).

Press small button again, switch off blue light(dock light).


Enjoyable Video:
[youtube]http://www.youtube.com/watch?v=dVBhAciIlnc&feature=youtu.be[/youtube]

Online shop: www.carymart.com

Smartphone iOS System WIFI Controller for Bracket Lights

One of our customers said that he installed some bracket lights on the wall of stairs. He wanted to remote control all bracket lights but sometimes it is not convenient to him to have a transmitter.

We recommend him our Smartphone WIFI remote controller WF-8-1R (iOS system). It supports 4.6 ~ 6.1 version iOS software system. That is to say, if you use our WIFI remote control and install our WIFI software in your mobile phone. Your mobile phone will be a transmitter which can work with WIFI controller in pairs to control electric devices.
It is applied in modern agriculture field, smart home, instruments, equipment control. WiFi remote control lights, motors, fan, electric doors / windows, aircraft, remote cars, remote toys, rolling blinds, pumps, winches, or other electrical devices with voltage AC110~240V or DC0~28V.
The following is the presentation.
They are WIFI controller, iPod, AC lamp and 12V adaptor.

Wiring:
Connect AC lamp to the output terminals (B&C) of WIFI controller.

Software installation:
Install the WIFI Controller software to your iPhone, iPad or iPod Touch by iTunes.
Note: Your iPhone, iPad or iPod Touch must be jailbroken.

Switch on the power of WIFI controller. Wait until power led and wifi start-up led turn on. After wireless network connection, press the icon of WIFI Controller software to turn on it.

There are 3 modes in common use. They are toggle, momentary and latched. But we usually use toggle or latched for lighting controlling. And there is “Time Delay” mode in it. Here is the presentation of “Toggle” and ”Time Delay” mode to control AC lamp.
Toggle Controlling:
Set up Toggle control mode: Press the “T” icon of channel 1. Choose T (Toggle) control mode.

Press button 1 and the color of button 1 icon changes to green, AC lamp will be on. Press the icon again, the lamp will be off.


Time Delay Controlling:
Set up Time Delay control mode: Press “0s” icon of channel 1. Enter the delay time, then Press “Ok” icon. The adjustable delay time is range from 1 second to 99 hours. We set delay time 5 seconds.

Press button 1 to turn on the lamp.

After 5 seconds, the lamp is off by itself.

Time Delay mode is much better for you to control your bracket light. If you set the delay time in advance, you don’t have to switch off it again because it is off automatically when delay time is up.
Video:
[youtube]http://www.youtube.com/watch?v=XM4nepjORHI&feature=youtu.be[/youtube]

Online shop: www.carymart.com

2 Channel Motorized Remote Controls Skylight and Water Pumps

Question from customer:
I have a project to install 1 linear dc actuator to control my skylight and 2 small water pumps. So I need to control from a remote. Both pumps need a remote switch for either on or off; 1 actuator needs a remote switch to up and down.

Answer:
We recommend you 2 motorized remote receiver (S2U-DC12) and 4 button transmitter (CV-4). 2 receivers are connected to linear actuator and water pumps’ motor respectively. You can use one transmitter to remote control them easily. This kind of remote can control Lights, Motors, Fans, electrically operated doors / locks / windows / blinds / cars or other appliances with AC110~240V or DC0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. The working distance is about 500m.
We have made a presentation to show you how to install and operate.
We prepare the following material.
2×2 channel receiver(S2U-DC12)
1×4-button transmitter(CV-4)
1×linear actuator motor
2×dc motor
DC 12V power supplies
Some lines

Here is the wiring for linear actuator.

Here is the wiring for dc motor.

One receiver is connected to the linear actuator, the other is connected to 2 dc motors.
Operation:
We set momentary mode for linear actuator controlling and toggle mode for small motor because they only need to be switched on and off. It won’t generate interference for each other, even though we use the same transmitter to control 2 receivers.
Switch on power.

Press and hold button 1, the linear actuator moves forward(stretch out). Release button, it stops moving.

Press and hold button 2, the linear actuator moves backward(draw back). Release button, it stops moving.

In a word, press button 1 and button 2 can make the linear actuator to reciprocating movement in a straight line. The skylight can be open or close through its reciprocating movement.
Press button 3, turn on motor 1. Press button 3 again, turn off motor 1.

Press button 4, turn on motor 2. Press button 3 again, turn off motor 2.

Video:
[youtube]http://www.youtube.com/watch?v=SyP6zaNva1c&feature=youtu.be[/youtube]
Online shop: www.carymart.com

1 Channel DC 12V Wireless Remote Control Modem On and Off

Question from customer:
I want to use your system to remote control turn on / off the power of the modem. I go from my office on the third floor of our home to the basement in order to turn off and disconnect the power to the modem. Then after a few minutes I reverse the process and reestablish the power to the modem and turn the modem on. The modem is power by an AC Adaptor (INPUT = 120-240V OUTPUT = 12V ).

Answer:
We recommend the model of 1 channel DC long range remote control kit (S1X-DC12-ANT2+1CB-2) to you. It can wireless control electric devices and  is easy to install. With direct power output, it means that you don’t need to supply power to the controlled device. It is capable of controlling lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. We add external extended antenna to it. The antenna can extend the controlling range to 2000M. So you can rest assured that signal can get through any obstacles to reach modem at your home.

As for your modem is powered by ac power, so you should connect the output of your AC Adaptor (12V) to two terminals + and - of this receiver, then connect two terminals A and B to your modem, then you can use our remote CB-2 to turn on / off the power of the modem.
You can set “Latched Mode”.
Press big button, turn on the modem.
Press small button, turn off the modem.

Online shop: www.carymart.com

8 Channel DC Remote Control for 24VAC Irrigation Controller

Question from customer:
Hello, I'm hoping you can assist me with product selection. What I'm hoping I can do is use one of your long range remote control systems to control the zones in an irrigation controller. The irrigation controller and irrigation zones operate on 24VAC.
I think that your product S8CA-DC12-ANT2+CB-8 would work for my needs if the relays were 24V AC instead of 120V AC. Attached is a diagram of how I'm envisioning it all working.

Answer:
8 Channel long range remote control is designed to be normally open and close connection. So all relays in this receiver can work at 24VAC. We add external extended antenna in the receiver in order to extend the range of remote controlling. It is estimated that the working distance of remote reach 2000M in the open filed.

There is 8 channel for your irrigation zones. According to your diagram, you can wire the irrigation zones and receiver as follow.

We supply receiver with other power so that no interference will generate between remote control and irrigation controller.
There are 8 working modes. You can choose any of them as you want. You can use one transmitter to open and close irrigation zones remotely.
Online shop: www.carymart.com